SMT stencil Printer GKG G5
GKG Series High Precision Atomatik Solder Manna Printer wanda aka ƙera don babban madaidaicin ƙarfe raga bugu ko bugu na stencil a cikin masana'antar SMT.
Buga girman PCB: 50mm x 50mm ~ 400x340mm;
PCB kauri: 0.4mm ~ 6mm
FPC kauri: ≦0.6mm (ban da jig)
Abubuwan da ake amfani da su na Abubuwan da aka haɗa
Abubuwan SMT kamar resistors, capacitors, inductor, diode da triode: 0201, 0402, 0603, 0805, 1206 da sauran bayanai dalla-dalla;
IC: goyan bayan SOP, TSOP, TSSOP, fakitin QFN, min.tsayi 0.3 mm;goyan bayan BGA, marufi CSP min.ball 0.2mm;
Nau'in PCB masu dacewa
Ya dace da nau'ikan PCB na wayar hannu, sadarwa, LCD TV, STB, cinema na iyali, kayan lantarki na abin hawa, kayan aikin wutar lantarki, sararin samaniya da jirgin sama, baya ga samfuran lantarki na gabaɗaya.
01
Duk sabon 3rd ƙarni stencil X katako tsarin, ƙara solder manna aiki mafi dacewa da daidai jeri karfe net;
Sabon nau'in juzu'i na katako na X, warware manna mai siyar da ƙura, tsawaita rayuwar sabis na injin;
02
Mai iya daidaitawa akan na'urar matsa lamba, saboda sauƙin nakasar bugun PCB na iya sa kwamfutar hannu ta fita, ba kwa buƙatar amfani da matsa lamba na ɗan lokaci kaɗan na iya komawa baya.Dangane da samfurin m amfani
03
Duk injin ɗin yana amfani da layin dogo na jagorar mai mai mai da kai, layin dogo na jagora baya buƙatar ƙara mai, a cikin shekaru biyar jagorar kulawa kyauta cikin shekaru biyar.
04
X Y1 Y2 a cikin motar linzamin Amurka HAYDON, madaidaicin tuƙi na Jafananci, dogo mai jagora mai mai mai mai kai, don tabbatar da daidaito
05
Net firam Y don gano wuri ta atomatik, zai iya gane ma'anar stencil ta atomatik da sauri;
06
Lanƙwasa katako ta amfani da ƙarfe mai ƙarfi, a cikin aikin bugu don tabbatar da kwanciyar hankali na bugu;
Nau'in nau'in scraper mai iyo, na'urar tsayawa ta musamman, na iya samun kariya mai kyau a cikin ƙwanƙwasa mai jujjuyawar juzu'i da scraper.
Ƙayyadaddun bayanai:
| Abu | Siga | |
| Maimaita Daidaitaccen Matsayi | ± 0.01mm (Bayanan gwaji da hanyoyin suna samuwa) | |
| Daidaiton Bugawa | ± 0.025mm (Bayanan gwaji da hanyoyin suna samuwa) | |
| Saurin Buga / Lokacin Zagayowar | <8s (Bare Bugawa & Tsaftacewa) | |
| Canjin Samfura | <5min | |
| Girman Stencil na allo/min-Max | 737mm x737mm | |
| Girman Stencil na allo/Kauri | 20mm ~ 40mm | |
| Girman PCB/Min-Max/Kauri | 50X50mm-400X370mm/0.4 ~ 6mm | |
| PCB Warpage Ratio | 1% (Ya danganta da tsayin diagonal) | |
| Kasa na Girman allo | 15mm (Standard sanyi), 25mm | |
| Gefen Girman Hukumar | 3 mm | |
| Conveyor Tsawon | 900± 40mm | |
| Hanyar Canjawa | Hagu-Dama;Dama-Hagu;Hagu-Hagu;Dama-Dama | |
| Saurin Canzawa | 100-1500mm/sec Mai sarrafa shirye-shirye | |
| Matsayin Hukumar | Tsarin Tallafawa | Magnetic fil / Side support block / M atomatik fil (na zaɓi) |
| Tsarin Matsala | Na roba gefen clamping/Vacuum bututun ƙarfe/tsawo-nau'in Z-direction saitin tebur | |
| Buga kai | Biyu indepandent Motorized printheads | |
| Saurin Squeegee | 6 ~ 300mm / s | |
| Matsin lamba | 0-10kg software iko (rufe-madauki martani feedback), matsa lamba bayyane | |
| Kwangilar Squeegee | 60°(Standard)/55°/45° | |
| Nau'in Squeegee | Karfe squeegee (misali), roba squeegee, da sauran nau'in squeegee za a musamman. | |
| Gudun Rabuwar Karfe Mesh | 0.1 ~ 20mm/sec Mai Shirye Shirye | |
| Hanyar Tsaftacewa | Nau'in bushewa, nau'in rigar, nau'in vacuum-nau'in (Haɗin da za a iya tsarawa na hanyoyin tsaftacewa) | |
| Rage Daidaita Tebur | X: ± 3mm;Y:±7mm θ:±2° | |
| Nau'in Fiducial Point | Daidaitaccen siffar lissafi na fiducial point, bonding pad / Stencil rami | |
| Tsarin Kamara | Kyamarar dijital guda ɗaya don tsarin hangen nesa na sama / ƙasa | |
| Hawan iska | 4 ~ 6Kg/cm2 | |
| Amfani da iska | Kimanin 0.07m3/min | |
| Hanyar sarrafawa | PC Control | |
| Tushen wutan lantarki | AC:220±10%,50/60HZ 1Φ 1.5KW | |
| Girman Na'ura / Nauyi | Ya dogara da ainihin samfurin | |
| Yanayin Aiki | -20°C ~ +45°C | |
| Aikin Humidity | 30% ~ 60% | |
